LE Wilson

L.E. Wilson case holders hold the case for trimming, primer pocket reaming, neck reaming and deburring with their Uniform Deburring Tools. The L.E....

These Neck Bushings fit inside the top portion of a LE Wilson Full Length or Neck sizer die and resize the case neck in order to provide sufficient...

LE Wilson Expanding Mandrels. Designed to be used on new rifle cartridge cases to prepare them for the seating operation. Over recent years we have...

Inherent with reloading is the potential to oversize your bottleneck rifle brass. And the most important use of a cartridge case gauge is for setti...

The LE Wilson Expanding Mandrel Sizing Die is designed to be used on new rifle cartridge brass cases to prepare them for the seating operation. Ove...

These Neck Bushings fit inside the top portion of a LE Wilson Full Length or Neck sizer die and resize the case neck in order to provide sufficient...

Inherent with reloading is the potential to oversize your bottleneck rifle brass. And the most important use of a cartridge case gauge is for setti...

A direct replacement for the standard bullet seating stem that is supplied with LE Wilson bullet seating dies. Reamed with a steeper angle, designe...

The L.E. Wilson case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with Wilson's Uniform Deburring Tool. Th...

Inherent with reloading is the potential to oversize your bottleneck rifle brass. And the most important use of a cartridge case gauge is for setti...

Inherent with reloading is the potential to oversize your bottleneck rifle brass. And the most important use of a cartridge case gauge is for setti...

All cartridge case mouths should be deburred after trimming and neck turning. This tool is double-ended with a standard 45-degree flutes that debur...

With the L.E. Wilson Case Gauge Depth Micrometer it has never been easier to measure your cases headspace before and after sizing. It is important ...

The L.E. Wilson Micrometer Top Bullet Seater Die, as its name suggests, incorporates several features that ensure reloaders have a tool that guaran...

Keep your dies separated and organized with this replacement die storage box from L.E. Wilson. This die box will hold 2 reloading dies and a L.E. W...

L.E. Wilson Power Adapter allows the L. E. Wilson Case Trimmer to be used with a slow low powered drill or electric screwdriver for easy case trimm...

Inherent with reloading is the potential to oversize your bottleneck rifle brass. And the most important use of a cartridge case gauge is for setti...

The L.E. Wilson Case Length Gauge is a one-piece, non adjustable cylinder-type gauge with milled surfaces on one end for checking minimum and maxim...

This LE Wilson case trimmer platform is a mounting board for the L.E. Wilson trimmer series and provides storage space for nine (9) case holders an...

The LE Wilson Expanding Mandrel Sizing Die is designed to be used on new rifle cartridge brass cases to prepare them for the seating operation. Ove...

Decapping base for use with LE Wilson Neck Bushing Sizer Dies. Hollow base to catch spend primers.

A direct replacement for the standard bullet seating stem that is supplied with LE Wilson bullet seating dies. Reamed with a steeper angle, designe...

L.E. Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by t...

L.E. Wilson’s bushing-type full-length sizing dies give you precise control over sizing both case neck and the rest of the case body at the same ti...