Redding Type S-Match Bushing Full Length Die Set, 6MM Dasher
Type S - Bushing Style Full Length Sizing Die
Provides reloaders with a simple means to precisely control case neck size and tension.
- Uses interchangeable sizing bushings available in .001" increments.
- The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
- Concentricity is enhanced by the ability of the resizing bushing to self-centre on the case neck.
- The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
- A decapping pin retainer is also supplied with most Type S - Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
Competition Bullet seating Die
This patented design quickly established itself as the “state of the art” in straigh tline bullet seaters and beat the concentricity problems inherent in all other seating dies of this type.
Tighter manufacturing tolerances were made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to “float” on a column of air. The seating stem is precision ground to exactly match the bullet diameter.
Case Hardened Steel
Die Types Included:
Type S - Full Length Bushing Die (with decapping / expander unit)
Competition Bullet Seating Die
Plastic Storage Case, Decapping Pin retainer (used if the expander size button is removed)
Notes: Shell holder Not Included