Skip to content

Inline Fabrication Ultra Mount JR Riser with Quick Change Base System


Notify me when back in stock

The Inline Fabrication QC Ultra Mount JR Raises your reloading press up to get the action closer to eye level and increase reloading comfort and ergonomics.

Super solid 3/16 steel construction, accessible lower storage tray and coated in beautiful black powder-coat are all features of this high quality reloading press stand. The modular design lends itself to fit just about any reloading press available today.

The QC Ultramount JR is 7-1/2" tall, 10-1/2" wide, and 9" deep . This base set up is to be used with Inline's quick change top plates. You need one top plate per item you wish to swap in and out.  Swapping out presses/tools takes less than 30 seconds and requires no tools!

Note The QC Ultramount JR's is only 7-1/2" tall, and some press linkages will hang below the benchtop to impede the opening of cabinet doors or drawers (If you have them) below your bench. If you have any doubt, before placing an order, measure the linkages hanging down below your bench top and subtract 7-1/2".

If you want to have the press completely on top of the bench, the standard Ultramount will fix you up perfectly.

Top plates sold separately.