K+M Shooting

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

The K+M Case Holder makes holding cartridge cases securely a breeze. Case preparation requires the repetitive holding of cartridge cases. Small dia...

An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides improved depth stop fingers and a mu...

These K+M replacement neck turner cutters are made out of carbide and ground to the correct dimensions. Replacement cutters for the K+M case neck t...

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" i...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...

This finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the “doughnu...

K+M PowerStroke™ version 2 (v2) Press Adapters (Patent Pending) are a significant advancement from K&M's Version 1 (v1) by adding multiple radi...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

The K+M case neck turner has a very unique cutter adjustment mechanism that allows for a very precise cutter adjustment. This design incorporates v...

This finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the “doughnu...

This precision ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the “doug...

This rugged right-handed arbor press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at the ...

These Forster neck turning pilots are used on the Forster Case Trimmer to turn concentric and uniform necks easily and accurately. Note: These pil...

The K+M Case Holder Power Adapter and Handle is used to hold the cartridge whilst neck turning.  The Adapter has 1/4" hex standard shaft while the ...

In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and inco...

This is a replacement flash hole cutter for the K+M Professional Flash Hole Uniformer. This one is designed for "PPC" cases with the .062" flash h...

Large Pistol set to .122" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's handles. K+M's primer ...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass duri...