K+M Shooting

This K+M rugged right-handed arbor press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at ...

Large Rifle is set to 0.131" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's handles. K+M's prim...

Small Pistol & Small Rifle set to 0.122" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's han...

The K+M Case Holder Power Adapter is used to hold the cartridge whilst neck turning under the power of a cordless screwdriver or low speed drill.  ...

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" i...

These K+M replacement neck turner cutters are made out of heat treated tool steel that is ground to the correct dimensions. Replacement cutters for...

K+M Case Mouth Tapered Reamer - An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides impr...

Use the K+M standard force pack option with .001" resolution dial indicator. Each .001" increment equals 1lb of force. Force range is 0-150lbs.

Improved ability to lock and unlock your case in the power adapter. Can be used with the  K+M handle, cordless screw driver or drill. Slide the Pow...

This rugged right-handed arbor press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at the ...

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" i...

This is the K+M Micro-Adjustable Case Neck Turner body (pilot not included.)  Some reloaders like to have multiple tools set up and this is a great...

The K+M Expand Mandrel Holder (EXMH) allows the installation of PowerStroke Expand Mandrels in tight working areas (co-ax and progressive presses)....

These Collets work in the K+M ergonomic Case Holder. Secure a wide range of cases for primer pocket work (head-facing) and, for most rimless cases,...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...

It can be hard to hold the K&M Micro Adjustable Neck Turner due to its compact size, especially in higher volume use. The Ergo Holder is manufa...

K+M PowerStroke™ version 2 (v2) Press Adapters (Patent Pending) are a significant advancement from K&M's Version 1 (v1) by adding multiple radi...

The K&M Primer Seat Tool with Dial Gauge If you want the ultimate in hand priming tools – the K+M Primer Deluxe will fit the bill. Benchrest Sh...

The K&M Primer Deluxe Hand Priming Tool If you want the ultimate in hand priming tools - the K+M Primer Deluxe will fit the bill. Benchrest Sho...

The Pilot Jack is used to assist setting the pilot position on the K+M Neck Turning Tool to achieve the proper cut into the case shoulder. Installa...

This aluminum handle is used with the K+M Power Adapter if you prefer to utilise the power case driver in manual mode while neck turning. This hand...