Case Preparation

The proven way to control costs and produce precise ammunition is to prep and condition cases yourself. Preparing cartridge cases for hand-loading can be a time-consuming and labour intensive stage, but it can result in more accurate and consistent ammunition.

Case prep is important to the reloading process because the case acts as both a container for the powder and bullet and as a seal for the gun’s chamber. How well you prepare your cases will affect the accuracy and consistency of your ammunition.

View as

Save 8%

Redding Case Trimmer Titanium Cutter Standard Calibres

Original Price £33.05

Current Price £30.45

| /

Redding Case Trimmers are designed to cut cases by hand fast and accurately. This titanium coated cutter is designed to trim 22 calibre and larger ...
View full details

Original Price £33.05

Current Price £30.45

| /

Save 8%
Save 0%

RCBS VLD 3-Way Adjustable Cutter (.22-.50 Calibre)

£147.00

| /

This is automated case preparation at its finest. The RCBS 3-Way Cutter is one of those accessories you can’t live without. Its unique three-blade ...
View full details

£147.00

| /
Save 0%

K+M Premium Carbide Flash Hole Uniformer 0.082"

£100.75

| /

The K+M Flash Hole Uniformer over comes some of the most detrimental affects on accuracy. In cartridge manufacturing, the flash hole is "punched" i...
View full details

£100.75

| /
Save 2%

L.E. Wilson Case Trimmer Stainless Steel

Original Price £140.35

Current Price £137.50

| /

Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their ...
View full details

Original Price £140.35

Current Price £137.50

| /

Save 2%
Save 3%

Forster Original, Power Case Trimmer 3 in 1 Case Mouth Cutter Carbide 30 Calibre (308 Diameter)

Original Price £105.30

Current Price £102.25

| /

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring, and outside deburring into one fast, easy step. Long-lasting carb...
View full details

Original Price £105.30

Current Price £102.25

| /

Save 3%
Save 3%

Forster Original, Power Case Trimmer 3 in 1 Case Mouth Cutter Carbide 28 Calibre (284 Diameter)

Original Price £105.30

Current Price £102.25

| /

The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring, and outside deburring into one fast, easy step. Long-lasting carb...
View full details

Original Price £105.30

Current Price £102.25

| /

Save 3%
Save 0%

Sinclair Premium Case Neck Turning Tool

£145.35

| /

The Sinclair NT-4000 Premium Neck Turning Tool is the finest, easiest to adjust, most accurate and comfortable to use hand neck turning tool availa...
View full details

£145.35

| /
Save 0%

RCBS Trim Mate Carbide Chamfer Tool

£101.45

| /

The Carbide Chamfer Tool is a replacement carbide-tipped cutter for the RCBS® Brass Boss. This tool cuts clean and stay sharp for a lifetime of use.

£101.45

| /
Save 2%

L.E. Wilson Case Trimmer Neck Reamer, 6mm Diameter (.2455-.246 Finished Diameter)

Original Price £46.15

Current Price £45.20

| /

Thick necks can cause high chamber pressures and erratic shooting. Neck reamers remove excess neck material to ensure adequate clearance exists bet...
View full details

Original Price £46.15

Current Price £45.20

| /

Save 2%
Save 2%

L.E. Wilson Case Trimmer Neck Reamer, 338 Diameter (.3405-.341 Finished Diameter)

Original Price £46.15

Current Price £45.20

| /

Thick necks can cause high chamber pressures and erratic shooting. Neck reamers remove excess neck material to ensure adequate clearance exists bet...
View full details

Original Price £46.15

Current Price £45.20

| /

Save 2%
Save 0%

K+M Neck Turner Pilot, 338 Calibre

£17.75

| /

This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...
View full details

£17.75

| /
Save 0%

K+M Expand Mandrel for Expand Iron Assembly, 20 Calibre

£17.75

| /

Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details

£17.75

| /
Save 0%

K+M Carbide Cutting Pilot w/Flutes, 26 Calibre/6.5MM

£61.20

| /

This finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the “doughnu...
View full details

£61.20

| /
Save 5%

Hornady Lock-N-Load® 6-Blade Inside Diameter Chamfering Tool

from Original Price £19.55

from £18.60

| /

The Hornady Large Calibre Chamfering Tool is an excellent piece of equipment for the reloader looking to gain every ounce of accuracy out of their ...
View full details

from Original Price £19.55

from £18.60

| /

Save 5%
Save 0%

Sinclair Carbide Small Rifle/Small Pistol Primer Pocket Uniformer

£43.80

| /

The Sinclair primer pocket uniformers are precision ground from one solid piece of tungsten carbide, so there is no need to worry about changing th...
View full details

£43.80

| /
Sinclair 8000 Series Primer Pocket Uniformer Handle

£20.00

| /

The Sinclair 8000 Series handle works great with the Sinclair primer pocket uniformers. Utilising a single set screw you can quickly change between...
View full details

£20.00

| /
Save 0%

RCBS Replacement Pow'r Pull Impact Bullet Puller Magnum Rifle Chuck Assembly

£10.30

| /

Designed for use with the RCBS® Pow’r Pull®, this case-holding chuck will accommodate most belted magnums including WSMs and Ultra Mags.

£10.30

| /
Save 0%

RCBS Collet Syle Bullet Puller 1-1/2"-12 Thread without Collet

£245.45

| /

The 1-1/2-inch—12 Bullet Puller is designed for use on the AmmoMaster®—2 or AmmoMaster .50 BMG press. Using the .416 or .50 BMG bullet puller colle...
View full details

£245.45

| /
Save 0%

K+M PowerStroke Press Adapter, 3-Row

£44.95

| /

K+M PowerStroke™ version 2 (v2) Press Adapters (Patent Pending) are a significant advancement from K&M's Version 1 (v1) by adding multiple radi...
View full details

£44.95

| /
Save 0%

K+M Premium Carbide Flash Hole Uniformer 0.062"

£100.75

| /

In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and inco...
View full details

£100.75

| /
Save 8%

Redding Large Case Neck Brush, .35 - .45 Calibre

Original Price £5.15

Current Price £4.75

| /

Clean dirt and powder residue from inside case necks with the Redding case neck brushes. Suitability: .35 to .45 Calibre

Original Price £5.15

Current Price £4.75

| /

Save 8%
Save 0%

Sinclair Stainless Steel Pilot Stop 338 Calibre (.338")

£22.35

| /

Sinclair manufacture pilots for their flash hole tool and our Neck Thickness/Variance Gauge. Their pilots are precision machined from stainless ste...
View full details

£22.35

| /
Sinclair LE Wilson Case Trimmer Crank Handle Upgrade

£26.65

| /

The Sinclair Crank Handle Upgrade for L.E. Wilson Trimmer Cutters is the same ergonomic replacement crank handle available in our Carbide Upgrade K...
View full details

£26.65

| /
Save 8%

Redding Flash Hole Deburring Tool with 22 Calibre Pilot

Original Price £38.15

Current Price £35.10

| /

During the manufacturing process, burrs that can cause erratic ignition are often left inside the case at the flash hole.Redding now manufactures t...
View full details

Original Price £38.15

Current Price £35.10

| /

Save 8%