RCBS Case Trimmer Collets
RCBS® Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and...
View full detailsThe proven way to control costs and produce precise ammunition is to prep and condition cases yourself. Preparing cartridge cases for hand-loading can be a time-consuming and labour intensive stage, but it can result in more accurate and consistent ammunition.
Case prep is important to the reloading process because the case acts as both a container for the powder and bullet and as a seal for the gun’s chamber. How well you prepare your cases will affect the accuracy and consistency of your ammunition.
RCBS® Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and...
View full detailsThe RCBS® Hand Case Neck Turner is designed to peel brass from the outside of a case neck to a consistent thickness, which is important because mos...
View full detailsThe Carbide Chamfer Tool is a replacement carbide-tipped cutter for the RCBS® Brass Boss. This tool cuts clean and stay sharp for a lifetime of use.
Many experienced reloaders turn case necks to ensure consistent neck thickness and the most accurate ammunition possible. These calibre specific pi...
View full detailsPrimer Pocket Uniformers are manufactured with carbide cutters, and serve to true the primer pocket wall and bottom.
Primer Pocket Uniformers are manufactured with carbide cutters, and serve to true the primer pocket wall and bottom.
The RCBS Trim Pro-2 Power Case Trimmer kit has the same clever spring-loaded universal shell holder as the manual trimmer version, but with a high-...
View full detailsDesigned to be used with the RCBS® Accessory Handle or on the RCBS Brass Boss, the .50 BMG Carbide Primer Pocket Uniformer utilises a carbide cutte...
View full detailsThis is automated case preparation at its finest. The RCBS 3-Way Cutter is one of those accessories you can’t live without. Its unique three-blade ...
View full detailsThis conversion kit upgrades the Trim Pro trimmer to eliminate the need to purchase additional Trim Pro Shell Holders. This conversion features spr...
View full detailsRaise a RCBS manual case trimmer to new heights with the Trim Pro Case Trimmer Stand. It provides more working room and hand clearance, as well as ...
View full detailsThis kit contains four of the most popular rifle pilots and shell holders for the RCBS® Trim Pro Case Trimmer. The pilots ensure that cases are pro...
View full detailsThis high-quality replacement cutter is designed for use with RCBS® Trim Pro® case trimmers. Cutter Material: Steel
The popular Trim Pro Case Trimmer has been improved with the addition of a spring-loaded universal shell holder. The spring-loaded shell holder sec...
View full detailsTrim big bore cases in no time with the RCBS® High Capacity Case Trimmer. Designed to handle the most beefy cases, such as the .50 BMG, .416 Barret...
View full detailsThis soft vinyl cover helps protect the Trim Pro®-2 Manual Case Trimmer. Folds easily for storage.
The Trim Mate Carbide Debur Tool is a replacement carbide-tipped cutter. It cuts clean and stays sharp for a lifetime of use.
The Quick Change Case Holder has many advantages over the competition. While most other units use a tap wrench design to hold cartridge cases, the ...
View full detailsRCBS® Case Neck Turner Pilot-Reamers allow fast, easy removal of excessive neck thickness or variation in case thickness from the inside of the cas...
View full detailsThe redesigned Trim Mate™ Military Crimp Remover—2 speeds up case processing and reduces the amount of primer pocket being cut away.
Designed for use with the RCBS® Pow’r Pull®, this case-holding chuck will accommodate most belted magnums including WSMs and Ultra Mags.
Designed for use with the RCBS® Pow’r Pull® Bullet Puller and accommodates most rifle and pistol cartridges.