Forster Dies

Foster Full Length Bench Rest Sizing Die

Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), de-primes, and expands the case neck.

Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in this sizing die.

Foster Bench Rest Bushing Bump Sizing Die Kit

The Forster Bench Rest Bushing Bump Sizing Die brings you an advanced level of precision by allowing you to precisely control the amount of bullet tension in your reloading cartridges. A one step neck sizing reduction/shoulder bump operation keeps your case necks straighter.

This die improves accuracy and prolongs case life because the body of your case maintains its fire-formed “glove” fit to your rifle’s chamber. At the same time it “bumps” the shoulder of the case to maintain excellent case neck concentricity. Best of all, it prevents overworking the neck and allows you to control the amount of neck tension for your bullet seating operation. Three standard bushing sizes, specially selected by Forster staff.

Forster Benchrest Bullet Seater

The sliding Die Chamber has a concentric bullet channel just slightly larger than the bullet diameter. This tight fit ensures straight-line (co-axial) seating.

The hand-polished Bullet Seating Stem provides consistent reloads. The Seater Die adapts to most standard reloading presses. Its non-crimping style provides accuracy, consistency, and perfect alignment.

This chamber design supports the entire outside diameter of the sized case rather than just the bullet and case neck.

Forster ULTRA™ Micrometer Seater

The Forster Ultra Seater includes all of the features of the Forster Bench Rest Seater Die plus an accurate micrometer adjustment. This micrometer adjustment allows you to adjust bullet seating depth from .0005 inch to .001 inch increments, and makes switching bullets easy - just dial back to your previous recorded setting. Forster Ultra Seaters make fine tuning bullet seating depth simple. All Forster dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature Cross Bolt Die Locking Rings that tighten the two ends of the split ring instead of tightening a screw directly into the threads of the die.

Foster Bench Rest Die Set

Forster Bench Rest Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature a Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the die threads. A full length two die set is the die set beginning reloaders should start with, and the die set most hunters and many target shooters use every time they reload their cases. This full length die sets includes a full length sizing die and the Forster Bench Rest seater die. Forster full length sizers feature the E-Z case neck expander system - a Forster exclusive.