Hornady’s Bench Rest Powder Measure gives you all the advantages of Lock-N-Load technology with the added benefit of more precise measuring. That precision comes from a specially designed metering insert and a smaller metering chamber to promote more consistent and uniform filling.
The micrometer adjustment gives positive reference for metering adjustments and you can install pre-set metering units by simply pushing the button on the outside of the metering chamber. There’s no need to drain your powder hopper or disassemble the Powder Measure. Simply use the Drain Tube Insert (sold separately) to rapidly and easily return powder to its container. Measurements adjust from 20 to 65 grains. All moving parts have been plated for protection and long life, and the rotor requires
NO lubrication. Not intended for use with Black Powder.
The RCBS Uniflow Powder Measure will throw consistently accurate charges by volume with all types of smokeless powder. The straight forward measuring cylinder design helps eliminate powder hang ups which can lead to double charges or overcharges. The numbered measuring screw changes easily from charge to charge, and enables you to go back to a known charge at a later date. The precision ground cylinder is honed main casting produce a smooth and accurate powder dispensing system. Mount is a standard 7/8 to fourteen thread, comes with a bench or shelf bracket and two drop tubes for 22 calibre and up. Mounts on the RCBS Powder Measure stand.
Not intended for use with Black Powder
This stand will raise most Powder Measures 9 1/2 inches (with a standard 7/8-inch–14 thread), leaving plenty of space for positioning a powder scale pan or cases in a loading block under the drop tube. The stand bolts easily to a reloading bench or table. It also serves as a stand for holding a Piggyback™ II, Piggyback—3 or —4 when not in use.
Note: Not for use with Little Dandy Powder Measure.
The original Redding Model 3, time proven for accuracy and reliability. It has a micrometer metering chamber right in front for easy setting and reading.
The micrometer makes it is possible to record your favorite settings and return to the same place weeks later when you wish to create the same load. Precision machined cast iron frame to give you
years and years of service.
All Redding Powder Measures feature hand honed frames and hard chromium drums for long life. An extremely sharp cutting surface easily cuts and meters even the most difficult powders.
Not intended for use Black Powder
The Competition 10x measure was designed expressly to throw precise, light powder charges for smaller cartridges. The 10x retains all of the features of Redding’s BR-30 competition measure but with a scaled-down metering mechanism for more precision with powder charges in the 1-to-25 grain range. Other features include anti-backlash micrometer adjustment, a positive metering chamber lock, and an adjustable powder baffle. The measure is easily adaptable to left or righthand operation and can even be used on some progressive presses or mounted to a bench with the included bracket.
The dedicated, reduced capacity design with ultra-precise micrometer adjustments make this measure ideal for assembling accurate handloads in the smaller pistol cases and .223, .221 Fireball, or the .17 Hornet.
Not Intended for use with Black Powder
For convenient bench-top mounting of Redding Powder Measures. Will also fit all other Powder Measures with 7/8-14 thread mounting. This bench stand is not threaded; it is secured with a lock ring which enables you to rotate the measure to any desired position and permits quick dump of the reservoir.
Reloading Solutions Limited
Tel: 01865 378200
Monday - Friday 09.00 to 17.00 hrs
Saturday and Sunday - CLOSED