Bullet Pullers

Frankford Arsenal Quick-N-EZ Bullet Puller

 

When you need to pull some bullets for whatever reason, an impact style tool is the convenient method. Just one stern “whack” and the bullet is separated from the case. It's that easy. Three different collets are included allowing you to pull bullets  from just about every calibre rimmed or rimless.

Hornady Lock-N-Load®Impact Bullet Puller

 

Remove bullets from cartridges without damaging the bullets.

Hollow head of bullet puller captures bullet and powder for reuse. Three collet sizes allow for use with cartridges from .22 up to .45 calibre. Can also utilize shell holders (not included).

RCBS Pow'r Pull® Kit

 

Get yourself out a jam with the RCBS® Pow’r Pull® Kit. This kinetic-style bullet puller’s rugged one-piece body and user-friendly ergonomic handle resolves mistakes quickly and easily. The three case holding chucks will accommodate cases from 5.7x28mm and .22 Hornet up through the WSM and RUM family of cartridges.

 

Note: Not for use with rimfire cartridges.

Hornady Cam Lock™ Bullet Puller

 

 

The fastest, easiest way to pull bullets with your press. Just clamp on the bullet, pull down on the handle and the bullet is removed. Intended for rifle cartridges only.

 

Uses standard collets sold separately, see chart below).

 

 

Hornady Cam Lock™ Bullet Puller Collet

 

 

Works with the Hornady Cam Lock™ Bullet Puller.

 

Bullet Dia. Collet # Bullet Dia. Collet # Bullet Dia. Collet #
0.172 1 0.277 5 0.375 10
0.204 14 0.284 6 0.410 / 0.416 11
0.224 2 0.308 / 0.312 7 0.430 12
0.243 3 0.321 / 0.323 8 0.451 / 0.458 13
0.257 / 0.264 4 0.338 / 0.358 9    

RCBS Standad Bullet Puller

 

Not sure about the powder charge? Need to change bullets? The RCBS® Standard Bullet Puller is designed to easily pull jacketed bullets without damaging them. It utilizes the standard 7/8-inch-14 thread and may be used in any single-stage reloading press with this thread. Note: Not for use with rimfire cartridges.

 

Uses standard collets sold separately, see chart below).

RCBS Standard Bullet Puller Collet

 

 

This collet is designed be used with the RCBS® Standard Bullet puller to remove bullets from a wide range of cases.

 

Bullet Dia. Bullet Dia. Bullet Dia.
0.17 0.27 9.3MM
0.20 7MM 0.375
0.22 0.30 / 7.35MM 0.416
6MM 0.32 / 8MM 0.45
0.25 0.338 0.475
6.5MM 0.348 0.500

Reloading Solutions Limited

 

Tel: 01865 378200
 

Opening Hours:

Monday - Friday 09.00 to 17.00 hrs

Saturday and Sunday - CLOSED

Print Print | Sitemap Recommend this page Recommend this page
© 2018 Reloading Solutions Limited. All Rights Reserved. E&OE. Terms & Policies