Kindly mention 'Last Chance Offers' when ordering any of the below items.
Eye Cover 03 Eye Cover 3A
Eye Cover 05 Eye Cover 07
Eye Cover 09 Eye Cover 10
Eye Cover 14 Eye Cover 15
Eye Cover 16
Eye Cover 21
Objective Cover 01 Objective Cover 02
Objective Cover 2A Objective Cover 3A
Objective Cover 07 Objective Cover 09
Objective Cover 12 Objective Cover 13
Objective Cover 15 Objective Cover 17
Objective Cover 19 Objective Cover 20
Objective Cover 21 Objective Cover 23
Objective Cover 25 Objective Cover 26
Objective Cover 29 Objective Cover 30
Objective Cover 34 Objective Cover 40
Objective Cover 44 Objective Cover 45
Objective Cover 46 Objective Cover 47
Objective Cover 48 Objective Cover 53
Hoppe’s BoreSnake is the fastest bore cleaner on the planet. One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160x larger than a standard patch.
24010 .17 HMR & CFR Rifle
24012 .243/6MM Rifle
24015 .30 calibre Rifle
24018 .35 -.375 calibre Rifle
24020 .50 - .54 calibre rifle
24025 .204 calibre Rifle
24033 20 Gauge Shotgun
24034 16 Gauge Shotgun
This is the classification for Sierra’s pre-eminent target bullets. The driving motivation for the design of each MatchKing bullet is accuracy. These bullets have very thin jackets drawn to an exacting concentricity standard of 0.0003 in maximum variation, and their weight is held to within ± 0.3 grain. All MatchKing have a hollow point design with a very small meplat for high ballistic coefficient. The majority of these bullets have a boat tail shape to further minimize drag and improve ballistic coefficient. They are manufactured to the very highest quality standards. Their accuracy has been acclaimed worldwide, and they have been used to win more target competitions than all target bullets from other manufacturers combined.
A little bit of colour goes a long way on a target and Caldwell’s® Shooting Squares are just the way to get it. These adhesive backed squares add a splash of fluorescent orange to any target backer to act as an aiming point or to cover holes from previously fired bullets. These Target Pasters will come in handy for revitalizing your favorite target for continued usage.
1.5in Squares (96)
1in & 2in Squares (108)
A little bit of colour goes a long way on a target and Caldwell’s® Shooting Spots are just the way to get it. These adhesive backed spots add a splash of fluorescent orange to any target backer to act as an aiming point or to cover holes from previously fired bullets. These Target Pasters will come in handy for revitalizing your favorite target for continued usage.
1in Spots (96)
3in Spots (24)
The Tipton® Range Box is the ultimate in convenience for shooters and hunters. It organizes everything you need, cleaning supplies, rifle rest bags, targets and more.
SPECS: Machined steel, in-the-white. Kit includes (1) 8½" (21cm) long rod, (1) 5½" (14cm) long rod, (2) 1"/30mm diameter outer ring sleeves, and complete instructions in a hard-shell storage box.
The Griz-Pak combines the hunter’s two most essential game care tools; a deep bellied skinning knife and compact field saw on a scent-free Zytel belt sheath. The Kodi-Skinner is perfectly balanced and features a wide cutting hook for easy field dressing. Each blade is hand-finished to a razor’s edge from premium AUS-8A stainless steel for superior edge retention and performance. For clearing tree limbs or separating tough bone, the Griz-Saw with triple-ground diamond cut blade is the finest available. Both the Kodi-Skinner and Griz-Saw feature rubberized Kraton® handles for a secure lock-on grip, even when wet. The Griz-Pak is built to perform and guaranteed for a lifetime of rugged outdoor use.
Lockback skinning blade plus Outdoor Edge’s revolutionary new flip-out gutting blade. Cuts underneath the skin to open game like a zipper. Rubberized Kraton handles with Traction-Slots offer a secure non-slip grip. Stainless 8Cr13MoV blade with one hand opening stud is hand finished shaving sharp. Complete with quality nylon belt sheath.
These are the sharpest, most powerful, spring loaded Game Shears available. They make easy work of field dressing birds, small game and fish. Features full-tang 420 stainless construction with bakelite handles, serrated cutting edge and special bone breaking notch. The Game Shears come complete with a quality leather belt sheath.
Product grip may differ from picture.
The UltraMag is the heavy duty workhorse of the Redding line, and is a no-nonsense high quality press. It is our favorite for large jobs and highly recommend it for the reloader needing a large frame press. The leverage system on this press (unlike most others) is connected to the top of the press frame which gives it literally tons of pressure without the usual concerns of press frame deflection or misalignment. This is an expensive press, but one we feel is worth the money, especially for long magnum cartridges. Dies not included.
The ChargeMaster Combo features the ChargeMaster 1500 Scale and ChargeMaster Dispenser, pre-assembled to form an unmatched combination of speed and accuracy. There is no longer a need for timely calibration to the type of powder being used. Simply fill the 1-plus-pound capacity hopper with smokeless powder, enter the desired charge and press the dispense button.
Note: Do NOT use with black powder.
(Two units available)
Larger than the Forster Original Case Trimmer, the Classic was the first production model trimmer on the market to accommodate a large range of classic cartridges. It’s suitable for more than 300 different big bore cartridges from popular big game rifles to classic black powder calibres.
The Classic trims case lengths from 1⅞” long through 4⅛” long; shorter cases can be trimmed by mounting on a standard length base. For collectors of vintage firearms, for “Cowboy” competitors and reenactors, and for owners of fine English single and double rifles chambered in hard hitting calibres like 500 Nitro Express, .416 Rigby, 50 Sharps, .475 Nitro Exp, etc., this is the hand case trimmer that will allow accurate trimming.
It is actually a fine miniature lathe with a superior shell holder design based on a Brown & Sharpe type collet. Collets #5 through #8 fit this Classic Case Trimmer and hold the rims of most rifle and pistol calibres within that range.
The default tool, the Cutter Shaft, features four staggered-tooth cutting edges made of high alloy steel that provide fast, smooth, chatterless cutting for perfectly square case mouths. You can also expand your system by adding many “accurizing” Case Trimmer accessories.
Hornady® manufactures Dangerous Game™ Series ammunition with only the finest components, under strict quality control measures. Their classic bullet designs are tailored to meet the needs of the serious safari hunter.
They use techniques and processes that rival hand loads, with the ultimate goal of making every cartridge accurate, deadly and dependable !
#8242 400gr DGS
#82433 400gr DGX
The SB-200 was not only designed for 22 rifle small bore competitors, but also for varmint hunters and plinkers. It will easily hold 100 rounds in the down position for easy access during competition. Space in the centre is available which can hold two full 50 round boxes. Recently retooled and now fits 17 HMR.
Ammunition for illustrative purposes only.
Holds Up To: 250 rounds of: 22 Long Rifle, 22 Long, 17 Mach 2
200 rounds of 22 Win. Mag.
150 rounds of: 17 HMR
Cartridges are placed in the box with the bullet in the down position and are protected by four special fingers. These fingers are designed to keep most bullet tips from hitting the bottom of the box, preventing tip damage that can change bullet flight characteristics.
There is also extra space provided between rounds to facilitate easy removal. The convenient fold down carrying handle is specifically designed so that belted magnum rounds can be carried rim up or down. The H-50-XL is for the extra large hunting rounds. The calibres listed are for bullet up position; however, some of the rimmed cases will fit better bullet down. See bullet chart for your calibre.
H50 RS Green - 17 Fireball, 17 / 221 / 223 Rem., 204 Ruger, 222 Rem. Mag., 223 Rem
H50 RS Clear Blue 17 Fireball, 17 / 221 / 223 Rem., 204 Ruger, 222 Rem. Mag., 223 Rem
H50 RL Green - .25-06 / 280 Rem., 257 Roberts, 270 Win., 30- 06 Spr., 318 Westley Richards, 330 Win. Mag., 338-06 A-Square, 35 Whelen, 6.5 Carcano, 7x57 Mauser, 7x64
H50 RL Clear Blue - .25-06 / 280 Rem., 257 Roberts, 270 Win., 30- 06 Spr., 318 Westley Richards, 330 Win. Mag., 338-06 A-Square, 35 Whelen, 6.5 Carcano, 7x57 Mauser, 7x64
H50XL Green - 270 / 300 / 325 / 338 / 7mm WSM, 300 / 7MM Rem. SAUM, 300 / 338 / 375 / 7mm Rem. Ultra Mag., 338 Lapua Mag., 338-378 / 375 Wby. Mag., 404 Jefffery, 404 Nitro, 40-70
Sharps(Straight) 416 Rigby, 45-110 Sharps, 458 Lott, 470 Capstick, 500 A-Square, 6.5x58 Rimmed, 7.21 Firebird, 7.62 Lazzeroni Warbird, 7.82 Warbird, 8x56 Rimmed Hungarian, 8x65 Rimmed, 8x64 Brenneke,
8.59 Galaxy, 8.59 Titan, 9.3x62, 9.3x82 Rimmed, 10.57 Meteor.
Cleaning the barrel on your rifle, shotgun or muzzleloader can be a messy choir. Solvent splatter, drips and dirty patches always seem to end up where you don’t want them. Strong solvents and powder residue can stain clothes and work surfaces. The Tipton® Patch Trap™ puts an end to the mess.
Conveniently packaged 12-piece calibre-specific set of Ultra Jags™ means you always have the right jag at hand. Contained in a durable, hinged box with marked cavities, it’s easy to select the correct Ultra Jag™ for your particular application. Because they are calibre-specific, you can be assured of an optimum fit to your firearm’s bore for efficient and thorough cleaning. 17 to 45 calibre (does not include 20 calibre). All jags have 8-32 threads (17calibre has 5-40 threads).
Combining the Ultra Jags™ and Best Bore Brushes™ into one convenient 26-piece set gives you the ultimate storage system for your brushes and jags . Neatly organized in a durable, hinged box, it’s easy to select the correct jag and brush for your particular application. Because they are calibre-specific, you can be assured of an optimum fit to your firearm’s bore for efficient and thorough cleaning. 17 to 45 calibre (does not include 20 calibre). All jags and brushes have 8-32 threads (17 calibre has 5-40 threads and is a standard bore brush).
With Hornady brass you’ll get more reloads, greater consistency, predictable performance and accuracy that commodity brass simply can’t deliver. They measure for consistent wall concentricity and run their cases through pressure calibration tests to ensure uniform case expansion. And each and every case is hand inspected. New, unprimed brass.
IMR 4007 SSC Super Short Cut Super Short granulated powder with a burn speed that falls between 4320 and 4350. Ideally suited for varmint cartridges like the 220 Swift, 22-250 Remington and 243 Winchester. Additionally, well suited for the venerable 30-06, the 300 Winchester Short Magnum, and the Super Short Magnums 243 and 25 Winchester.
1 LB canister
These innovative, high-quality leather and polyester Front Shooting Bags function with most brands of front rests. The exclusive hook and loop tabs or the Front Rests allow quick installation and removal from the cradle without time-consuming need to lace them on. The leather gives you a secure rest and the polyester, which will not stretch or sag, allows the bag to hold it’s shape. Unfilled.
Accepts up to 2-1/4 in forends
The Caldwell® Handy Rest NXT® is an extremely versatile front rest. It is designed with a full six feet of elevation adjustment at 100 yards (3” at cradle), a front sling stud clearance groove, and is constructed of durable, lightweight materials. The innovative design includes a removable handgun support attachment that easily converts this rifle rest into a handgun rest. The front rest and handgun support feature a material that will not harm your valuable firearm yet also offers a steady shooting surface.
The removable handgun support allows you to use the Handy Rest NXT with a pistol and revolver, in addition to a rifle.
The extremely tough nylon coating on these rods won’t scratch the delicate rifling of the finest match barrel and won’t peel off like many other vinyl coatings. Smooth turning, ball bearing handle and supplied with an Adapter for standard 8-32 male thread brushes and accessories (except .17 and 20 calibre rods which have 5-40 female threads). Plus, an extra-long Dewey Jag that takes a patch either wrapped-around, or over-the-end, and fits directly onto the rod’s male thread. The .17 and .20 calibre series rods do not require or include a brush adapter.
.20c 38 inch Rifle Cleaning Rod £27.95
.22c - 6.5MM 36 inch Rifle cleaning rod £25.00
.22c - 6.5MM 44 inch Rifle Cleaning Rod £26.00
.270c & UP 36 inch Rifle Cleaning Rod £25.00
.270c & UP 44 inch Rifle Cleaning Rod £26.00
Copper Eliminator Series
Cleaning rods, brushes, jags, and adapters have machined aluminum components don’t react with ammonia-based solvents like brass parts sometimes do. They won’t produce blue-green stains on your patches that can be misinterpreted as “false positive” indications of copper fouling, so you’ll know when your bore is free of copper. Similar in hardness to brass, Copper Eliminator parts won’t scratch the bore or damage the muzzle. Top-quality steel rods have the same tough, nylon outer coating and ball-bearing smooth rotating handle as standard Dewey rods, with an 8-32 female threaded aluminum ferrule. Each rod comes with an aluminum Copper Eliminator jag.
.22c - 6.5MM 44 inch Rifle Cleaning Rod £33.00
.270c & UP 44 inch Rifle Cleaning Rod £33.00
Each Pro-Shot cleaning rod has a hard, dense, mirrorlike finish that prevents the rods from picking up abrasive grit or dirt and carrying it into the bore. Pro-Shot micro polish every rod in addition to their centerless grinding process. All rods (except for .17 and .20 calibre) have female threads and accept 8-32 accessories including jags and brushes. The .17 and .20 calibre rods have 5-40 threads. Fitted with a comfortable machined, anodized aluminum handle. Rod lengths exclude the handle.
.17c 38.5 inch Rifle Cleaning Rod £33.65
.22c - 6.5mm 36 inch Rifle Cleaning Rod £30.00
.22c - 6.5mm 42 inch Rifle Cleaning Rod £35.00
.270c & UP 36 inch Rifle Cleaning Rod £31.00
.270c & UP 42 inch Rifle Cleaning Rod £36.00
Upper: Nubuk leather with wax
Lining: GORE-TEX® Footwear
Comfort: Memory Foam System
Footbed: Air-Active® drysole soft print footbed
Sole: Meindl Multigriff® -Sole from Vibram
Weight: approx. 840 g (size 8)
Size 9 - 1 pair only
Size 10 - 1 pair only
Lining: GORE-TEX® Waterproof Membrane
Comfort: Memory Foam System
Footbed: Air-Active® dry sole soft print footbed
Sole: Meindl Multigriff® -Sole by Vibram
Weight: approx. 890 g (size 8)
Size 9 - 1 pair only
Size 10 - 1 pair only SOLD
Pricing applies to in stock product only.
Reloading Solutions Limited
Tel: 01865 378200
Monday - Friday 09.00 to 17.00 hrs
Saturday and Sunday - CLOSED