This rugged right-handed arbor press is used with in line bullet seating and neck sizing dies and can be used at your home loading bench or at the ...
View full details
Save 2%
Large Rifle is set to 0.131" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's handles. K+M's prim...
View full details
Made out of tool steel that gets heat treated and then ground. Replacement cutters for the K+M case neck turning tool are offered in a range of lea...
View full details
K+M Case Mouth Tapered Reamer - An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides impr...
View full details
In cartridge manufacturing, the flash hole is "punched" into the brass. While this is the least expensive method, it has many shortcomings and inco...
View full details
Save 2%
Small Pistol & Small Rifle set to 0.122" depth Designed with a drive shank to be used with your cordless screwdriver and/or either of K+M's han...
View full details
Save 2%
The K+M Case Holder Power Adapter is used to hold the cartridge whilst neck turning under the power of a cordless screwdriver or low speed drill. ...
View full details
This is the K+M Micro-Adjustable Case Neck Turner body (cutter/pilot not included.) Some reloaders like to have multiple tools set up and this is ...
View full details
Save 2%
Improved ability to lock and unlock your case in the power adapter. Can be used with the K+M handle, cordless screw driver or drill. Slide the Pow...
View full details
It can be hard to hold the K&M Micro Adjustable Neck Turner due to its compact size, especially in higher volume use. The Ergo Holder is manufa...
View full details
Save 20%
The Pilot Jack is used to assist setting the pilot position on the K+M Neck Turning Tool to achieve the proper cut into the case shoulder. Installa...
View full details
The K+M Expand Mandrel Window Riser is a simple device that brings the case neck expanding above the press and allows for the full visual of the pr...
View full details
Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details
Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details
The K+M Press Adapter is used with K+M Expand mandrels. It threads directly into most standard reloading presses with 7/8-14 threads. It does not i...
View full details
The K&M Primer Seat Tool with Dial Gauge If you want the ultimate in hand priming tools – the K+M Primer Deluxe will fit the bill. Benchrest Sh...
View full details
This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...
View full details
This steel neck turning pilot is specifically for the K+M Neck Turning Tool. The use of a good lubricant is necessary to avoid galling brass during...
View full details
An improvement to a long standing superb case mouth chamfering tool with a newly designed handle that provides improved depth stop fingers and a mu...
View full details
The K&M Primer Deluxe Hand Priming Tool If you want the ultimate in hand priming tools - the K+M Primer Deluxe will fit the bill. Benchrest Sho...
View full details
Save 2%
This aluminum handle is used with the K+M Power Adapter if you prefer to utilise the power case driver in manual mode while neck turning. This hand...
View full details
Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details
Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details
Virgin/competition brass isn't quite ready to neck turn when you buy it. And the commercial die manufacturers have no set standards for the expande...
View full details
