Redding Reloading
The quality and accuracy of your reloaded ammunition depends largely on the quality of the equipment you use to assemble it.

Redding Big Boss II Reloading Press

The Big Boss II now features the unique Redding “Spent Primer Collection System” used on the T-7 and Ultramag presses. This top of the line single station press has the largest window opening and longest usable ram stroke of any press in its class. Simply, the only press you will ever need!

Redding T-7 Turret  Reloading Press

The new T-7 combines strength, power and convenience with the speed and versatility of a turret press. 

“Cast iron construction, powerful compound linkage and a rigid seven station turret combine to make the new Redding T-7 the best turret press ever!” The design criteria was to create the ultimate turret press. Our engineering team started with our time proven cast iron construction and turret support that is second to none. They added powerful compound linkage with over 3.8” of ram travel. A 1” diameter hollow ram was chosen with the “smart primer arm” and “spent primer collection system” borrowed from our Ultramag. Another station was added to the turret for even greater versatility and an optional “Slide Bar Automatic Primer Feeding System” was designed. After adding a few more subtle refinements and built with the precision you would expect from Redding, we’re confident this is the best turret press ever.

Redding Ultramag Reloading Press

 “The largest and strongest press available for the toughest reloading chores...” (HANDLOADER, No. 148)

At first glance you will see what sets the ULTRAMAG apart from all other reloading presses: the unique location of its compound leverage system. Unlike other reloading presses which connect the linkage to the lower half of the press, the ULTRAMAG’S leverage system is connected to the top of the press frame. This allows you to develop literally tons of pressure without the usual concern about press frame deflection or misalignment. The ULTRAMAG features a huge 4-3/4” frame opening and 4-1/8” of usable ram stroke, making it ideal for loading oversized cartridges such as the old Sharps “Buffalo Cartridges” and British “Nitro-Express” rounds. Its unique long link compound leverage system has more mechanical advantage over a greater distance than any other reloading press on the market. This makes “childs play” of difficult case forming operations.Information about our products and services can be found here.

Redding Model 1400 Case Trimmer

The Model #1400-XT Case Trimming Lathe uses a cast iron frame that has been extended to handle all the latest long action cartridges. The frame is cast iron because it is a perfect bearing surface, will not wear out and will maintain its precision and alignment for years of service.

This case trimmer was designed using precision lathe principles. The TiN coated cutter is held stationary while the case is turned; this produces cases that are perfectly square, resulting in increased accuracy from your handloads

Redding Model #2 Bullet & Powder Scale

Designed and manufactured with the utmost attention to accuracy and sensitivity standards. The Model 2 scale includes a magnetic dampened beam swing for extra fast readings plus, hardened and ground knife edges ride in precision milled stainless steel bearing seats that will not crack, chip or lose their alignment.

The graduated plate at the beam pointer is marked in 1/10 grain increments for easy reading of over or under charges. This eliminates the need to move the counterpoises to check powder charge variations.

Every Redding scale manufactured is still individually tested and adjusted to U.S. Bureau of Standards Approved Master Weights, and guaranteed accurate to less than 1/10 grain!

Redding Model #3 Powder Measure

The original Redding Model 3, time proven for accuracy and reliability. It has a micrometer metering chamber right in front for easy setting and reading. With this micrometer it is possible to record your favorite settings and return to the same place weeks later when you wish to create the same load. Precision machined cast iron to give you years and years of service.

The hand honed fit between the frame and hard surfaced drum enables all Redding Powder Measures to easily cut and meter even the most difficult powders.

Redding Full Length Die Sets

Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimping ring and the proper seating plug.

Redding Deluxe Die Sets

Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of our full length die sets (described above) with the addition of a neck (NK) sizing die.

Redding Type-S Match Full Length Die Set

Note: For the ultimate shoulder bump control, use our Type-S Full Bushing Die with our new Competition Shellholders. 

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.
• Uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies.
• The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired.
• Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.
• All Type S dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S - Bushing Style Neck Sizing Dies.
TYPE S – MATCH  Bushing Full Die Set includes
• Type S – Bushing Full Sizing Die
• Competition Seating Die
All dies are supplied without bushings.

Redding Type-S Match Neck Die Set

The new Type S - Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension.
• Uses interchangeable sizing bushings available in .001" increments. • The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired.
• Concentricity is enhanced by the ability of the resizing bushing to self-center on the case neck.
• The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is.
• A decapping pin retainer is also supplied with all Type S - Bushing Dies. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity.
TYPE S – MATCH Bushing Neck Die Set includes:
• Type S – Bushing Neck Sizing Die
•Body Die
•Competition Seating Die
All dies are supplied without bushings.